12-boosted_higgs-old.cc

Go to the documentation of this file.

//----------------------------------------------------------------------
/// \file
/// \page Example12old 12 - boosted Higgs tagging (old version)
///
/// fastjet example program, illustration of carrying out boosted
/// Higgs subjet ID analysis
///
/// It illustrates two kinds of functionality: 
///
///  - following the decomposition of a jet into pieces
///  - following information on a b-tag through the jet
///
/// This kind of functionality was used in arXiv:0802.2470
/// (Butterworth, Davison, Rubin & Salam) for boosted Higgs searches,
/// and related functionality was used in arXiv:0806.0848 (Kaplan,
/// Rehermann, Schwartz & Tweedie) in searching for boosted tops
/// (without b-tag assumptions).
///
/// Note that this example is deprecated --- see 12-boosted_higgs.cc
/// for the newest version --- so it is not built by default
///
/// run it with    : ./12-boosted_higgs-old < data/HZ-event-Hmass115.dat
///
/// Source code: 12-boosted_higgs-old.cc
//----------------------------------------------------------------------
 
 
//STARTHEADER
// $Id$
//
// Copyright (c) 2005-2018, Matteo Cacciari, Gavin P. Salam and Gregory Soyez
//
//----------------------------------------------------------------------
// This file is part of FastJet.
//
//  FastJet is free software; you can redistribute it and/or modify
//  it under the terms of the GNU General Public License as published by
//  the Free Software Foundation; either version 2 of the License, or
//  (at your option) any later version.
//
//  The algorithms that underlie FastJet have required considerable
//  development and are described in hep-ph/0512210. If you use
//  FastJet as part of work towards a scientific publication, please
//  include a citation to the FastJet paper.
//
//  FastJet is distributed in the hope that it will be useful,
//  but WITHOUT ANY WARRANTY; without even the implied warranty of
//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
//  GNU General Public License for more details.
//
//  You should have received a copy of the GNU General Public License
//  along with FastJet. If not, see <http://www.gnu.org/licenses/>.
//----------------------------------------------------------------------
//ENDHEADER
 
#include "fastjet/ClusterSequence.hh"
#include <iostream> // needed for io
#include <sstream>  // needed for internal io
#include <iomanip>  
#include <cmath>
 
using namespace std;
using namespace fastjet;
 
 
//----------------------------------------------------------------------
// set up a class to give standard (by default E-scheme)
// recombination, with additional tracking of flavour information in
// the user_index. 
//
// b-tagged particles are assumed to have their user_index set to 1,
// and other particles should have user_index to 0.
//
// Watch out however that, by default, the user_index of a particle is
// set to -1 and you may not have control over that (e.g. if you
// compute the jet area using explicit ghosts, the ghosts will have a
// default user_index of -1). For that reason, if one of the particle
// being combined has a user index of -1, we assume it is not b-tagged
// (i.e. we count it as 0 in the recombination)
//
// This will work for native algorithms, but not for all plugins
//----------------------------------------------------------------------
typedef JetDefinition::DefaultRecombiner DefRecomb;
 
class FlavourRecombiner : public  DefRecomb {
public:
  FlavourRecombiner(RecombinationScheme recomb_scheme = E_scheme) : 
    DefRecomb(recomb_scheme) {};
 
  virtual std::string description() const {
    return DefRecomb::description()+" (with user index addition)";}
 
  /// recombine pa and pb and put result into pab
  virtual void recombine(const PseudoJet & pa, const PseudoJet & pb, 
                         PseudoJet & pab) const {
    DefRecomb::recombine(pa,pb,pab);
    // Note: see the above discussion for the fact that we consider
    // negative user indices as "0"
    pab.set_user_index(max(pa.user_index(),0) + max(pb.user_index(),0));
  }
};
 
 
//----------------------------------------------------------------------
// forward declaration for printing out info about a jet
//----------------------------------------------------------------------
ostream & operator<<(ostream &, PseudoJet &);
 
 
//----------------------------------------------------------------------
// core of the program
//----------------------------------------------------------------------
int main (int argc, char ** argv) {
 
  vector<PseudoJet> particles;
 
  // read in data in format px py pz E b-tag [last of these is optional]
  // lines starting with "#" are considered as comments and discarded
  //----------------------------------------------------------
 
  string line;
  while (getline(cin,line)) {
    if (line.substr(0,1) == "#") {continue;}
    istringstream linestream(line);
    double px,py,pz,E;
    linestream >> px >> py >> pz >> E;
 
    // optionally read in btag information
    int    btag;
    if (! (linestream >> btag)) btag = 0;
 
    // construct the particle
    PseudoJet particle(px,py,pz,E);
    particle.set_user_index(btag); // btag info goes in user index, for flavour tracking
    particles.push_back(particle);
  }
 
 
  // set up the jet finding
  //
  // This also shows how to use the "FlavourRecombiner" user-defined
  // recombiner 
  // ----------------------------------------------------------
  double R = 1.2;
  FlavourRecombiner flav_recombiner; // for tracking flavour
  JetDefinition jet_def(cambridge_algorithm, R, &flav_recombiner);
 
  
  // run the jet finding; find the hardest jet
  ClusterSequence cs(particles, jet_def);
  vector<PseudoJet> jets = sorted_by_pt(cs.inclusive_jets());
 
  cout << "Ran: " << jet_def.description() << endl << endl;
  cout << "Hardest jet: " << jets[0] << endl << endl;
 
  // now do the subjet decomposition
  //----------------------------------------------------------
  //
  // when unpeeling a C/A jet, often only a very soft piece may break off;
  // the mass_drop_threshold indicates how much "lighter" the heavier of the two
  // resulting pieces must be in order for us to consider that we've really
  // seen some form of substructure
  double mass_drop_threshold = 0.667; 
  // QCD backgrounds that give larger jet masses have a component
  // where a quite soft gluon is emitted; to eliminate part of this
  // one can place a cut on the asymmetry of the branching; 
  //
  // Here the cut is expressed in terms of y, the kt-distance scaled
  // to the squared jet mass; an easier way to see it is in terms of
  // a requirement on the momentum fraction in the splitting: z/(1-z)
  // and (1-z)/z > rtycut^2 [the correspondence holds only at LO]
  double rtycut              = 0.3;
 
  PseudoJet this_jet = jets[0];
  PseudoJet parent1, parent2;
  bool had_parents;
 
  while ((had_parents = this_jet.has_parents(parent1,parent2))) {
    // make parent1 the more massive jet
    if (parent1.m() < parent2.m()) swap(parent1,parent2);
 
    // if we pass the conditions on the mass drop and its degree of
    // asymmetry (z/(1-z) \sim kt_dist/m^2 > rtycut), then we've found
    // something interesting, so exit the loop
    if (parent1.m() < mass_drop_threshold * this_jet.m() &&
        parent1.kt_distance(parent2) > pow(rtycut,2) * this_jet.m2()) {
      break;
    } else {
      // otherwise try a futher decomposition on the more massive jet
      this_jet = parent1;
    }
  }
 
  // look to see what we found
  if (!had_parents) {
    cout << "Did not find suitable hard substructure in this event." << endl;
    return 0;
  }
 
  cout << "Found suitable pair of subjets: " << endl;
  cout << " " << parent1 << endl;
  cout << " " << parent2 << endl;
  cout << "Total = " << endl;
  cout << " " << this_jet << endl << endl;
 
  // next we "filter" it, to remove UE & pileup contamination
  //----------------------------------------------------------
  //
  // [there are two ways of doing this; here we directly use the
  // exsiting cluster sequence and find the exclusive subjets of
  // this_jet (i.e. work backwards within the cs starting from
  // this_jet); alternatively one can recluster just the
  // constituents of the jet]
  //
  // first get separation between the subjets (called Rbb -- assuming it's a Higgs!)
  double   Rbb = sqrt(parent1.squared_distance(parent2));
  double   Rfilt = min(Rbb/2, 0.3); // somewhat arbitrary choice
  unsigned nfilt = 3;               // number of pieces we'll take
  cout << "Subjet separation (Rbb) = " << Rbb << ", Rfilt = " << Rfilt << endl;
 
  double   dcut  = pow(Rfilt/R,2);  // for C/A get a view at Rfilt by
  // using a dcut=(Rfilt/R)^2
  vector<PseudoJet> filt_subjets = sorted_by_pt(this_jet.exclusive_subjets(dcut));
 
  // now print out the filtered jets and reconstruct total 
  // at the same time
  cout << "Filtered pieces are " << endl;
  cout << " " << filt_subjets[0] << endl;
  PseudoJet filtered_total = filt_subjets[0];
  for (unsigned i = 1; i < nfilt && i < filt_subjets.size(); i++) {
    cout << " " << filt_subjets[i] << endl;
    flav_recombiner.plus_equal(filtered_total, filt_subjets[i]);
  }
  cout << "Filtered total is " << endl;
  cout << " " << filtered_total << endl;
 
}
 
 
//----------------------------------------------------------------------
// does the actual work for printing out a jet
//----------------------------------------------------------------------
ostream & operator<<(ostream & ostr, PseudoJet & jet) {
  ostr << "pt, y, phi =" 
       << " " << setw(10) << jet.perp() 
       << " " << setw(6) <<  jet.rap()  
       << " " << setw(6) <<  jet.phi()  
       << ", mass = " << setw(10) << jet.m()
       << ", btag = " << jet.user_index();
  return ostr;
}